INNOVATIONS AND CHANGES
Firmware: FW 11/91
| • | there is a new "Bluetooth configuration" tool in Windows/Start/Programs/Carsoft |
| o | it will refresh the Bluetooth parameters if there is a problem with the connection of your Bluetooth interface (while the USB connection is working properly) |
| o | find out more about this tool in the user manual (question-mark icon in all SuperVAG programs) |
SuperVAG
| • | improved selection of a concrete control unit |
| o | only name, code and fuel is displayed |
| o | there is also a basic identification available |
| • | new icon on the "Comfort functions" bar: "End of communication" |
| • | the Print screen function was improved |
DIAG
| • | communication on Jumper III was improved |
COMFORT PSA
| • | brand new Autotest function (find out more about this function in the User manuel - chapter Special communication) |
COMFORT VW
| • | notably extended list of supported UDS control units |
| o | about 7000 new control units |
| • | displaying of the blocks of measured values on VW Tiguan TRW450 ABS was repaired |
| • | extended support of the VW Crafter and Mercedes-Benz Sprinter control units (Delphi Euro 5) |
| • | erasing of the error codes on VW Crafter / MB Sprinter was improved |
| • | improved / extended displaying of the blocks of measured values on some air-conditioning control units, central electric units and the central comfort units |
| o | more precise detection of the control units |
| • | Service interval reset on VW Crafter was improved |
| • | Adaptation - new list of available channels |
| o | now you can select an adaptation channel either by his name or by his number |
| • | new test function: DPF regeneration for the EDC17 control units |
| • | improved comfort functions "Key programming", "Remote control programming" a "Testing of the remote control signal" |
| • | communication with the instrument cluster and immobilizer on Audi A4 8E repaired |
| • | repaired blocks of measured values on Simos AQW ECU |
| • | repaired "Login detection" via KWP2000 |
| • | repaired "Identification" via KWP 1281 |
| • | faster reading of measured values |
| • | Lamborghini Gallardo 2004- supported |
| o | instrument cluster available (key and remote control programming) |
Original COMFORT VW application
| • | "Service interval reset" on VW Crafter (2006, 2008, 2012) was repaired |
| • | new comfort function "Daytime running lights ON" a "Daytime running lights OFF" on VW Crafter and Mercedes Sprinter |
| • | long coding for getaway 7N0 (Superb II / Octavia II facelift ...) now available |
TOOLBOX
SPEED 4
| • | more supported control units |
| o | 8 more types of the instrument clusters is now available (including VW Amarok, VW Polo and Skoda Octavia 2010) |
SPEED 3
| • | new warning dialog regarding the "flash downgrade" of the instrument cluster (Skoda Octavia 2006-2009) |
| o | if you agree, the operation will be performed and a new error code appears in the memory (3 failure) |
SPEED 2
| • | check of the Immo ON / OFF function on EDC16 |
| • | repaired "Mileage estimation" and "Mileage correction" on some EDC16U1control units |
| • | repaired "Mileage correction" on the Visteon instrument clusters (Golf Plus 2005 - 2009) |
| • | repaired "Mileage correction" on the RB4/RB8 control units |
VIN-R 3
| • | reading of the Component security bytes on 2,0 FSI / 3,2 FSI (Skoda/VW 2006-2009) |
| • | new warning dialog regarding the "flash downgrade" of the instrument cluster (Skoda Octavia 2006-2009) |
| o | if you agree, the operation will be performed and a new error code appears in the memory (failure 3) |
VIN-R 2
| • | improved "Login detection" on some EDC16U1 control units |
AIRBAG
| • | all functions are now available in the recent TOOLBOX application |
| o | supported control units: Siemens VW 2, VW 3, VW5.1 and VW6 |
FLASH
| • | supported control units SID206 CAN (Ford Mondeo / S-Max) - reading / writing |
| • | improved reading for EDC15 on faster speeds |
| • | file content verification on PSA EDC16 |
| o | test for the BOSCH number (1037xxxxxx) |
| o | there is a possibility of a new software number (since 2009) 1039xxxxxx |
| • | VAG EDC16 - the K-line isn't forced anymore |
| • | if there is a match between the currently loaded and a saved data file, you will be asked if the saved file has to be overwritten |
