INNOVATIONS AND CHANGES
Firmware: FW 17/98
| • | brand new SuperVAG Configurator for all SuperVAG modules: |
| o | full description of this new tool can be found in the user manual - search for this icon in the SuperVAG programs:  |
| o | new indicators of the device and internet availability |
SuperVAG
| • | brand new program interface for the following function: Blocks of measured values, Basic setting, Login and Adaptation |
COMFORT VW
| • | Škoda Citigo, VW Up! and Seat Mii are now supported |
| o | supported functions: autotest, identification, trouble codes, blocks of measured values |
| • | another 500 supported types of VAG UDS control units |
| • | brand new program interface for the following function: Blocks of measured values, Basic setting, Login and Adaptation |
| o | list of available channels (named, numbered) |
| o | supported control units: |
- EDC15, EDC16, PPD, ME7.5, MED9, SIMOS 3PA, 3PB, 3PD, 3PE, 3PG, MARELLI
| • | the Coding function is now available on all VW-concern control units |
| o | supported via KWP1281 / 2000 / CAN / UDS from 2008 |
| • | the Login function is now available on the UDS control units |
| o | supported engines 1.6 TDI / 1.2TSI / 2.0TDI from 2010 |
| • | enhanced support for the block of measured values on the trailer control unit (Audi Q7, VW Touareg, Skoda Octavia II, Audi A3, Seat Toledo/Leon) |
| • | service interval reset on Audi A6, A7, Q7, A8 2010- |
| • | service interval reset on Skoda Octavia II facelift, Skoda Fabia 2010-, Skoda Superb 2009-, VW Polo 2010-, VW Golf VI, Seat Ibiza 2009-, Seat Leon 2010- |
| • | service interval reset on Skoda CITIGO |
| • | enhanced support for EDC17CP20 injection (2,0 TDI CR CJAA, CAGA, CAHA, CAGB) |
| o | basic setting, login, adaptation, FAP filter regeneration, injector coding) |
| • | injector coding on the PPD engines (BVE,BMA,BUY,BUZ,BMN,BKP,BWV,BRD,BMR) |
| o | available as an Adaptation function |
| • | central electric unit on UDS is now supported |
| • | improved displaying of the blocks of measured values via UDS |
| • | repaired Autotest function |
| o | if a control unit cannot be identified, it will appear in an special list at the end of the searching process, where you can specify it manually |
| • | repaired Login function on the older VW cars |
| • | improved communication with VW Crafter |
| • | reading of the trouble codes on the older VW cars was repaired |
| • | blocks of measured values on the older VW cars was repaired |
Original COMFORT VW application
| • | "Long coding" is now available on the following cars: |
| o | engines: 1,2 TSI (03F906070xx), 1,6 TDI (03L906022xx), 2,0 TDI (03L906022xx), 1,2 TDI (03P906021xx), 2,0 TFSI (8K2907115xx), 1,6 TDI (03L906023) |
| o | CAN-BUS: Golf / Octavia / Superb /.. from 2010-, 1K0907951, 25-7N0907530 |
| o | central electric system: Golf / Octavia / Superb / .. from 2010-, 5K0937084xx, 5K0937085xx, 5K0937086xx, VW Touareg / Phaeton 7L6937049xx |
TOOLBOX
SPEED 3
| • | improved mileage estimation / correction on Jumper III 2006-/ Boxer / Ducato |
SPEED 2
| • | improved communication with the VDO K-line instrument clusters (2006-2009, Škoda Fabia/Roomster) |
| • | reading / writing of serial EEPROM, mileage estimation / correction |
VIN-R 3
| • | improved communication with the VDO K-line instrument clusters (2006-2009, Škoda Fabia/Roomster) |
| • | reading / writing of serial EEPROM, mileage estimation / correction |
VIN-R 2
| • | secrete code reading on BOSCH ME7.1 and ME7.1.1 (engines 2,8 a 3,2) |
| • | secrete code reading on MARELLI, typ 4HV (03C906xxxx) |
| • | secrete code reading on SIMOS 7.1 a 9.1 |
FLASH
| • | support for EDC16C34 CAN on Citroën Berlingo (2006-2010), Peugeot Partner (2006-2010), reading / writing |
| • | support for EDC16C39 on Fiat Croma II, K-line, reading / writing |
| • | support for SID803A on Peugeot 407 (SVG6 or PSA CAN2/3 required) |
| • | decoding of the VAS update files improved (SIMOS 9.1) |
